Central Florida Research Park

CMMC consulting for Central Florida Research Park contractors.

We are an Orlando-based, SBA-certified Veteran-Owned Small Business, about 15 minutes from Research Park. We work with modeling, simulation, and training contractors supporting Team Orlando: we assess, map, write the SSP and POA&M, specify changes, validate, and produce the evidence package.

A full-motion flight trainer on a motion base inside a hangar.
U.S. Navy photo
In person, near the park

Based 15 minutes from Research Park — we'll meet you for coffee.

You do not have to start with a long proposal. If you work in or around Central Florida Research Park, we will meet you in person to walk through the clauses in your contract, the information you handle, and whether a gap assessment is the right first step. Pick a time that works, and we will meet you near the park.

Current status: Phase 2 is suspended. Phase 1 still applies.

Mandatory Phase II Level 2 C3PAO requirements were suspended July 13, 2026. Phase 1 self-assessment requirements, Level 1 Self and Level 2 Self, still apply. Start with the procurement requirement, NIST SP 800-171 Rev. 2 implementation, evidence and the applicable self-assessment process.

Team Orlando

The Research Park is a modeling, simulation, and training cluster — and CMMC follows the contract.

Central Florida Research Park sits next to the University of Central Florida and houses the military program offices and industry partners known as Team Orlando. If you build training systems, simulations, courseware, or related research for those offices, CMMC and DFARS flow-downs often arrive with the technical data and the clause list in your contract. This page is for that cluster. For general Orlando-area CMMC consulting, see our Orlando CMMC page. For a short primer, see CMMC for Orlando's simulation and training contractors.

Central Florida Research Park and UCF

The Central Florida Research Park is a campus-like environment for business, located adjacent to the University of Central Florida. The park's own site lists 140+ companies. It is the physical home of the Team Orlando partnership and the service program offices described below.

Team Orlando

Team Orlando is the interservice partnership of military, industry, and academia for modeling, simulation, and training in Central Florida. Its military commands are housed in government and partnership buildings throughout the park, with Naval Support Activity Orlando operating as the base commander for that location.

NAWCTSD, Navy

The Naval Air Warfare Center Training Systems Division is the Navy's principal center for research, development, test and evaluation, acquisition, and product support of training systems. It has been stationed on Naval Support Activity Orlando, in the Research Park, since 1988, at 12211 Science Drive.

CPE ST3, Army (formerly PEO STRI)

The Army's Capability Program Executive Simulation, Training, Test and Threat (CPE ST3) is headquartered at 12211 Science Drive. It was redesignated from Program Executive Office Simulation, Training and Instrumentation (PEO STRI) on February 6, 2026. If your contract still says PEO STRI, the CMMC obligation is unchanged: it follows the clause and the information you handle.

AFAMS, Air Force

The Air Force Agency for Modeling and Simulation is a field operating agency of Headquarters U.S. Air Force, located at 3051 Technology Parkway in the Research Park. AFAMS champions modeling and simulation concepts for Air Force training and readiness and is part of the Team Orlando community in the park.

PM TRASYS, Marine Corps

The Program Manager for Training Systems is Marine Corps Systems Command's executive agent for acquisition and life-cycle support of Marine Corps ground training systems, devices, and training support services. The business office is at 12211 Science Drive in Orlando.

What we deliver

A clear path from the clause in your contract to a supportable evidence package.

CUI boundary definition

We map where CUI or FCI enters, is stored, is processed, is transmitted, and leaves — including engineering files, source code, and test data that often come with simulation and training work — so you harden only what belongs in scope. CUI boundary definition →

Level 2 Self readiness

We assess the 110 NIST SP 800-171 Rev. 2 requirements against your actual boundary, then prepare the SSP, evidence, SPRS submission, and annual affirmation for the active Phase 1 path. Level 2 requirements →

Level 1 readiness

If your company handles Federal Contract Information supporting the Department of Defense, we assess the 15 FAR safeguarding requirements, specify each change, and prepare the annual self-assessment and affirmation.

SSP, POA&M, and evidence

We write the System Security Plan and POA&M where allowed, assemble diagrams and evidence, and prepare the SPRS information you need to enter. SPRS explained →

Specified changes, then validation

We specify each change required to close a gap and validate the result. You keep the evidence package that comes out of that work.

Secure CUI enclave planning

When only a subset of users needs CUI, we compare a constrained enclave approach such as PreVeil with broader platform changes, so you do not expand scope farther than the contract requires.

Single-Framework Gap Assessment

Start with a $1,750 gap assessment.

A fixed fee of $1,750 for a single framework, scoped before work begins. $500 is credited toward a remediation or readiness engagement that begins within 60 days of final assessment delivery. You leave with a clear picture of the applicable CMMC level, the boundary, the gaps, and the work required next. If you would rather talk it through in person first, we will meet you near the park.

SBA-certified Veteran-Owned Small Business (VOSB) · Cyber AB Registered Practitioner, CPN 76768 · BBB accredited · UEI T97XZHE7C5D5 · CAGE 1AVJ5

Close enough to meet. Structured enough to finish the work.

We are based about 15 minutes from Research Park. Meeting in person is how many of these engagements start — a working conversation about your contract and your systems. After that, we assess, specify, and validate, whether we meet again on site or continue remotely.

If you are an Orlando-area contractor outside the Research Park cluster, the Orlando CMMC consulting page is the better starting point. For a short written primer aimed at simulation and training firms, read CMMC for Orlando's simulation and training contractors.

Related guidance

Read the requirements before you spend on tools.

CMMC consultant in Orlando

General CMMC and NIST 800-171 consulting for Orlando-area defense contractors, with nationwide remote support.

DFARS 252.204-7012

The clause behind most CUI flow-downs: adequate security, incident reporting, and subcontractor obligations.

FAQ

Questions Research Park CMMC buyers ask us.

Can we meet in person?

Yes. We are based about 15 minutes from Central Florida Research Park and will meet you for coffee to talk through your contract, your CMMC path, and what a gap assessment would cover. Use the scheduling link to pick a time. We also work remotely when that is easier.

How is this different from your Orlando CMMC consulting page?

The Orlando page is the general CMMC consulting page for Orlando-area defense contractors. This page is for companies in and around Central Florida Research Park — the modeling, simulation, and training contractors supporting Team Orlando and the service program offices in the park. If you want a city-wide starting point, use the Orlando page. If you work in the park, start here. We also published a short primer on CMMC for Orlando simulation and training contractors.

We work in the Research Park or support Team Orlando programs. Does CMMC still apply?

If your contract or a flow-down requires CMMC, or you handle Federal Contract Information or Controlled Unclassified Information, the obligation follows the information and the clause. Modeling, simulation, and training work often involves technical data, software, and test information that can bring CUI into scope. The starting point is the clause list in your contract and the type of information you actually receive, store, process, or transmit.

What does a CMMC engagement look like for a simulation or training contractor?

We assess your current program against the applicable CMMC level, map where FCI or CUI lives — which for simulation work is often engineering files, source code, or test data — write or update the System Security Plan and POA&M, specify the changes required, validate that those changes hold, and produce an evidence package. Your team or IT provider makes the system changes.

How much does a gap assessment cost, and what is the first step?

A Single-Framework Gap Assessment is a fixed fee of $1,750, scoped before work begins. $500 is credited toward a remediation or readiness engagement that begins within 60 days of final assessment delivery. Send us the applicable contract or flow-down clauses, or meet us near the park, and we will confirm the applicable CMMC path before you commit.

Is a C3PAO assessment required for Research Park contractors right now?

Mandatory Phase II Level 2 C3PAO requirements were suspended July 13, 2026. Phase 1 self-assessment requirements, Level 1 Self and Level 2 Self, still apply. Start with the procurement requirement, NIST SP 800-171 Rev. 2 implementation, evidence, and the applicable self-assessment process. If a future contract again requires a C3PAO assessment, the same evidence package is the foundation for that path.

Start with a conversation near the park, or with the clauses in your contract.

Meet us in person about 15 minutes from Research Park, or send the applicable contract or flow-down clauses and identify the systems that receive, store, process, or transmit FCI or CUI. We determine the applicable CMMC requirement, define the preliminary boundary, assess implementation gaps, and identify the documentation and evidence work required.

The appearance of U.S. Department of War (DoW) visual information does not imply or constitute DoW endorsement.